The Labconco Cell Logic B2 Biosafety Cabinets provide personnel, product, and environmental protection from hazardous particulates such as agents that require Biosafety Level 1, 2, or 3 containment. Other appropriate applications include work with antineoplastic drugs, genetic material, asbestos, and additional substances that generate hazardous airborne particles. All models are NSF-Listed

These biological safety cabinets are designed to be hard ducted to the outside. During operation, room air is drawn into the top of the cabinet and through a supply HEPA filter. This filtered air flows downward through the work area. Room air is also drawn into the inlet grille located at the work access opening.

All Type B2 Biosafety Cabinets rely on external blowers (usually on the roof of the building) to exhaust 100% of the air entering the cabinet. If the building exhaust blower fails or is mistakenly turned OFF, the cabinet will become pressurized, resulting in contaminated air flowing from the work area into the laboratory. Perform a risk assessment regarding the type of work to be performed in the cabinet if there is an unintended loss of exhaust air.

Key Features

• Electronically Commuted Motor (ECM)
• Constant Airflow Profile (CAP) airflow monitoring system
• Intrinsically-safe negative pressure design
• Air-Wave Entry System
• Contain-Air Negative Pressure Channel
• Supply and exhaust 99.99% efficient HEPA filters. 99.999% efficient ULPA filters available
• Interior-mounted, line-of-sight, color LCD with MyLogic OS display filter life, status messages for alarm conditions and alerts. 8 languages available.
• Bright, 90-150 foot candle, glare-free LED lighting located outside the contaminated work area
• Fully-closing, clear ¼” tempered safety glass sash
• Curved stainless steel inlet grille with Reserve-Air Secondary Airflow Slots
• Two electrical duplex receptacles. Flush-mounted-stainless steel with dampened hinges
• Single outlets on 230V models. One outlet on each side, with ground fault interruption (115V)
• Smart-Start System user-programmable startup & shut down
• Leak-tight stainless-steel interior & powder-coated steel exterior
• Removeable towel catch located under work surface
• Code-activated electronic security lock
• 6” (57 cm) max. sash opening & 27.0” (69cm) viewing height
• 10° Angled sash with counterbalanced, easy lift mechanism
• ADA-compliant touchpad control on the right-side post
• Removeable, stainless steel type 304 stainless steel, dished work surface with lift out knobs
• Noise level <63 dBA
• Heat load 990 BTU/hour (4’ models)
• Nominal inflow velocity of 105 fpm (0.5 m/s)
• Nominal downflow velocity of 55 fpm (0.3 m/s)
• 10’ (3m) power cord with plug
• Five-Year Warranty